什么都要钱 发表于 2014-4-27 12:27:53

关于惠普5500绘图仪出现代码0B0010 036000C0解决方案

关于惠普5500绘图仪出现代码0B0010 036000C0解决方案
系统错误：0B0010 XXXXXXXX（不可继续）问题描述：..此固件错误代码是关系到打印头清洁器由线传感器它的初始化过程中总是会发生，同时检查打印头清洁器在大多数情况下的检测，它是一个错误地插入打印头清洁器，但它也可以由不正确的组装服务Station.Corrective行动造成的问题：尝试以下操作：？？取下打印头清洁器，并再次重新插入如果错误仍然存在，请执行服务站校准⇒第5-11页。？如果错误仍然存在，进行实地访查是必要的重复校准或更改服务站组件或笔架组件。
目前已解决

什么都要钱 发表于 2014-4-27 12:29:04

System Error:0B0010 xxxxxxxx (Non-Continuable)Problem Description:This firmware error code is related to the detection of the Printhead cleaners by the line sensor. It always happens during initialization, while checking the Printhead Cleaners. In most case, it is a problem of incorrectly inserted Printhead Cleaners, but it can also be caused by an incorrectly assembled Service Station.Corrective Action:Try the following:Remove the Printhead Cleaners and reinsert them again.If the error still persists, perform the Service Station Calibration ⇒ Page 5-11.If the error still persists, an onsite visit is necessary to repeat the calibration or to change the Service Station assembly or the Carriage Assembly.

淫的一首好湿 发表于 2014-4-27 13:01:38

{:taobao85:}

gu1217812 发表于 2014-5-7 17:18:42

本人认识洋文，但洋文不认识我
页: [1]
查看完整版本: 关于惠普5500绘图仪出现代码0B0010 036000C0解决方案