|
|
发表于 2008-12-2 10:38:58
|
显示全部楼层
楼主看打印机闪的是E-2-4还是E-4-2
对比上面的代码，就知什么问题了
如果是E42，还有一种可能，就要主板坏了
清零试试（在网上搜索到的，是E文）
• CANON RESETTERCanon MP160 , MP145
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)
[ 本帖最后由 chen_junlong 于 2008-12-2 10:41 编辑 ] |
|
楼主
