|
发表于 2013-9-6 16:29:40
|
显示全部楼层
手册上的 Try the following:
􀂄 Switch the Power OFF from the back of the Printer and disconnect the
Power cord. Reconnect the power cord and power On the Printer.
􀂄 Check that the Front Panel interface cable is not damaged and is
correctly connected between the Main PCA and the Front Panel.
􀂄 Check that the memory module in the Formatter is installed correctly.
􀂄 Check that the connections between the Formatter, the Formatter and the
Formatter are not damaged and are correctly connected.
􀂄 Check that the Printer has the latest Firmware version. If not, update the
Firmware to the latest version.,,
一般是清洁格式化卡金手指,重插,不行的话考虑测试哈硬盘, |
|